myQrc. updating current test

Just a quick note of the current development.

I tested sucessfully:

  • ESC mode
  • Motor mode
  • sensor.py – I modify the calibration procedure.Now after a calibratin, you can see the angles  really equal to zero.
  • display.py  – add yaw in the kayboard command

Performance test: I can run  the mian task and update sensor every 5ms.

(need to take care on log: everytime I add a log line  this time goes up to 16ms ,probably it is the time to open ,write and close the file. So when flying ,do not use debug level).

I’m now facing on some problem with netscan function. The main scope of it is to monitor that the PC used to send command , is always connected to rpi. It is working fine whentested on laptop. In rpi is not so stable. I’m investigating on that.

Also the webserver has got some problems when running on rpi: if i double click on the browser button, sometime it  freeze the main task: not so good… (I’m thinking to remove this funciton from version 1)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s